tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com parameter symbol specification condition 10.0 ~ 12 mhz refer to table 3: developed frequencies 12.001~49.09mhz fundamental frequency tolerance (@25c) ? f/fo 20*,30 & 50ppm(std ) please specify stability over temp range tc 20ppm ~ 50ppm (see table 2) please specify temp operating range topr 0~+50c ~ -20~+70c(std) ( see table 2) please specify temp storage range tstg -40 ~+85c equivalent series resistance esr see table 1 load capacitance cl 16pf ~ 50pf & series shunt capacitance c0 5pf max drive level dl 100w typical 500w max fl min to max <1.3 insulation resistance ir 500m ? min aging fa 5ppm p/yea r * * a 3ppm aging p/year part is available as a "semi-custom" device - please enquire. date 31-5-2012 in line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice for quotations or further information please contact us at: issue 7 c1f 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk http://www.actcrystals.com customer to specify : frequency, frequency tolerance, temperature stability, operating temperature & load capacitance please note that all parameters can not necessarily be specified in the same device iso9001:2000 registered drive level dependency (16, 20 & 30pf standard please specify) the act534smx-2 family is a low cost, 2 pad, high quality, low aging 5x3.2mm smd crystal in a ceramic base / ceramic lid package, glass sealed for good reliability. the wide frequency range and specification options ensure suitability for many applications. applications: instrumentation, notebook, security, games, audio-visual, office automation, micro clock, process control & consumer. act534smx-2 specification (first year max @ 25c ) <12mhz 15max/ 12-20mhz 12 max />20mhz 10 max 0.01, ~,100 ? w 6 steps @100v dc dld2 fdld please specify frequency range fo h1 a tape reel c wwow1lol1ho b tolerance 0.2 0.05 0.1 0.1 0.1 0.05 0.1 dimension 12.0 5.5 5.45 3.5 8.0 0.3 1.6 d 0.2 180 80 13.5 2.0 1 1 0.5 standard reel 1k pcs pad surface material: gold (au) others: enquire 12.000mhz 10.0mhz - 12.0mhz developed frequencies 10.000 mhz 11.0592mhz table 3 table 1 esr ( ? ) max mode / cut fundamental / at fundamental / at fundamental / at 50 12.000 ~ 14.999 15.000 ~ 49.090 60 80 frequency range 10.000 ~ 11.999 (mhz) stability temp -30~+80c *20ppm for frequencies <27mhz please enquire standard -40~+85c ? ? -20~+70c ? * ? -10+60c ?? ??? table 2 standard stabilities +/- 10ppm +/- 20ppm* +/- 30ppm +/- 50ppm 0~+50c 1 of 2
example : bw 1200 i k g c - pf (534smx-2) ( 12.00 mhz) (30ppm) (30ppm) (-20+70) (1k reel ) (rohs) e 10 g 20 f fundamental h 25 a 3rd overtone - pf i 30 a 0~50 l 50 e -10~60 ro 16 g -20+70 to 18 vo 20 package aa 24 l = loose ba 25 c =1k reels da 30 f 10 sr sr i 20 j 25 k 30 o 50 notes : 1) 2) 3) 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, united kingdom issue 7 c1f date 31-5-2012 series : act534mx-2 part numbering code is bw ro f (16pf) (fund') tolerance (pm) @ 25oc frequency to 99.9999mhz 1st four digits of frequency & >99.9999mhz 1st five digits of frequency operating temperature range (oc) load capacitance ( pf or series resonance) mode rohs comp' examples stability over operating temperature (oc) 1200 = 12.000mhz 9999 = 99.9999mhz bw1200ikgrofc - pf ( 12.00 mhz) 10000 = 100.000mhz nb: it is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below full example part number http:www.actcrystals.com for quotations or further information please contact us at: iso9001 registered tighter tolerances and stabilities and other operating temperature ranges may be available. as each of these specification par ameters impact on each other, it is not always possible to combine all options in one device. therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). act are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested aql requirements, non standard packaging or taping and reeling and custom marking. such devices would normally be allocated a custom specification part number which is wholly customer specific. ( eg : a 12.00mhz custom act534smx-2 device may have a part number such as bw1200c- c1500-pf) a guide to availability of tighter stabilities appears in the tables above. table 3 others: enquire 12.000mhz 10.0mhz - 12.0mhz developed frequencies 10.000 mhz 11.0592mhz stability temp -30~+80c *20ppm for frequencies <27mhz please enquire standard -40~+85c ? ? -20~+70c ? * ? -10+60c ?? ??? table 2 st andard stabilities +/- 10ppm +/- 20ppm* +/- 30ppm +/- 50ppm 0~+50c
|
